WX-Steuerung - Repaeter Controller  FAQ`s

 

 Which radios are working well with the controller?

The receiver need a COR signal to ground or to plus.

 Many HAM radios have a data connector ( 6 pin Mini DIN socket, COR on pin 6, 5 volts with open squelch  ) 

 Receiver audio level must be higher 450 milivolts RMS and wired after the squelch.

 The signal direct from the FM discriminator ist not qualified, but not switched from the squelch

 Transmitter on signal ( PTT ) to ground or to plus. Audio modulation level between 4mV-700 mV RMS.

 
Follow radios are good:

Comtex CT-588

 Kenwood TM-V7,TM-V71E

 Yaesu FT-8900, FT-8800, FT-7100, FT-7800

 Icom IC-E2820, IC-E208, IC-2725E, IC-706MKIIG

 Motorola GM300, GM350, GM900, GM950, GM1200, MCmicro, M110

 Tait T800

 Bosch KF..3, KF..4, KFS..7, KF..8, MR11, FuG8, FuG9, FSO3, FSOz

 Telefunken FuG7, SEL FuG7

 Funkwerk Köpenick, UDZ72, UDZ76, UFS7..

 Grundig FK105

 EADS Teledux9

 Nokia BSR

 and a lot of others.

 
Support the controller CTCSS or PL-Tones?

No! The controller is only wired  on the audio signal level.

 Most radios support CTCSS or PL tone very well at factory.

 

 
Open questions for using or wiring with radios?

Not sure?

Ask me!

I have long experience with radio communication.

 

 formular for  contact

 Back to main page